13-63.
13-64.
13-65.
13-66.
13-67.
13-68.
Which of the following conversion operations
reduces the result of the conversion to a binary
code acceptable to digital equipments?
1. Encoding
2. Sampling
3. Decoding
4. Quantization
Which of the following conversion operations
rounds out the conversion to the value of the
LSB?
1. Encoding
2. Sampling
3. Decoding
4. Quantization
Which of the following conversion operations is
performed only when a conversion is required?
1. Encoding
2. Sampling
3. Decoding
4. Quantization
In natural binary code, which of the following bit
positions has the greatest weight or represents
the largest value?
1. BAM
2. LSB
3. MSB
Binary angular measurement uses what binary
code?
1. Natural binary code
2. Hexadecimal
3. Gray code
4. BCD
BAM data words are designed to indicate what
maximum number of degrees of angular
measurement?
1.
45
2.
90
3.
180
4.
360
13-69.
13-70.
13-71.
13-72.
13-73.
When only the MSB of a BAM word used to
transmit a non-angular value is set, what is the
quantity indicated?
1.
2.
3.
4.
The minimum value that can be transmitted
The maximum value that can be transmitted
One half of the minimum value that can be
transmitted
One-half of the maximum value that can be
transmitted
Binary-coded decimal uses what total number of
bit positions to represent a single decimal digit?
1. One
2. Two
3. Eight
4. Four
Which of the following binary codes is designed
to change from one value to the next with only
one bit change?
1. Hexadecimal
2. BCD
3. Gray code
4. Natural binary code
A torque system has which of the following
characteristics?
1. It provides a turning force to drive light loads
2. It provides an electrical output used to control
the power that performs mechanical work
3. It is the combination of a synchro transmitter
and synchro receivers
4. It is a variety of rotary, electromechanical,
position sensing devices
A synchro system has which of the following
characteristics?
1. It provides a turning force to drive light loads
2. It provides an electrical output used to control
the power that performs mechanical work
3. It is the combination of a synchro transmitter
and synchro receivers
4. It is a variety of rotary, electromechanical,
position sensing devices
96
