2-26.
During the reception of the data
segment of a Link-11 message, the 605
Hz Doppler tone should be at which of
the following power levels?
1 .
+12 dB
2 .
+ 6 dB
3 .
– 6 dB
4 .
0 dB
2-27.
When the DTS is in the OPERATE
mode, exactly how many fault-sensing
sensors can cause the SUMMARY
FAULT lamp to light?
1 . 1 1
2 . 1 4
3 . 2 3
4 . 2 7
2-28.
The LAMP TEST switch on the Mode
Control Panel will cause all of which of
the following lamps to light?
1. Those on the mode control panel
only
2. Those on the TADIL A control
panel only
3. Those on the address control unit
only
4. Those on the mode control panel,
the TADIL A control panel, and
the address control unit
2-29.
When the
FULL-DUPLEX/HALF-DUPLEX
switch is in the FULL-DUPLEX
POSITION, the transmit sidetone is
processed for input to the computer.
1 .
True
2.
False
2-30.
When the SIDEBAND SELECT switch
is in the DIV position, which sideband
signal is processed for input to the
computer?
1. USB only
2. LSB only
3. The combination of the USB and
LSB signals
4. Either the USB or the LSB,
depending on the signal quality of
each sideband
2-31.
During normal Link-11 operations, the
DATA RATE switch on the mode
control panel should be in which of the
following positions?
1 .
1,200 bps
2 .
2,400 bps
3 .
DUAL 1,200 bps
4 .
TADIL A
2-32.
The SYNC MODE switch on the mode
control panel is used in conjunction
with which of the following switches on
the TADIL A control panel?
1. OPERATE/RADIO SILENCE
switch
2. NET CONTROL/PICKET switch
3. TIMING STORED/CORRECTED
switch
4. ERROR CORRECT/LABEL
switch
13
