2-38.
When you depress the TRANSMIT
RESET switch on the TADIL A control
panel, it causes the DTS to perform
which of the following operations?
1 .
2 .
3 .
4.
To immediately stop all
transmissions
To inhibit the generation of output
data requests, generating a stop
code and ending the current
transmission
To place the radio in radio silence
To inhibit the generation of input
data requests, generating a stop
code and ending the current
reception
2-39.
The DTS is configured as a picket
station in roll call mode. When you
depress the TRANSMIT INITIATE
switch on the TADIL A control panel,
it will cause the DTS to perform which
of the following operations, if any?
1. To immediately transmit the data
2. To allow the unit to enter the net
3. To assume control of the net as
NCS
4. None
2-40.
On the NCS platform, the MISS CALL
indicator on the TADIL A panel will
light when a picket fails to respond to
two successive interrogations.
1 .
True
2 .
False
2-41.
The address entered into the OWN
STATION ADDRESS switches perform
which of the following DTS functions?
1. Transmits the entered address to all
other members of the net
2. Transmits the entered address to
NCS only
3. Receives messages that match the
entered address
4. Transmits tactical data when the
interrogation message address
matches the entered address
2-42.
On the NCS platform operating in a
Link-11 net where the units are
approximately 100 miles apart, which
of the following values should be
entered into the RANGE IN MILES
switches?
1 .
0 miles
2 .
25 miles
3 .
50 miles
4 .
100 miles
2-43.
With a single address control indicator,
an NCS platform can control what
maximum number of participating
units?
1. 5
2 . 1 0
3 . 1 5
4 . 2 0
2-44.
Data exchange between the Link-11
DTS and the CDS computer is
controlled by the DTS using which of
the
1 .
2 .
3 .
4.
following control signal protocols?
External interrupts
External functions
Input data requests
Output data requests
15
